| 序号 | 姓名 | 类别 | 学科专业名称 | 论文题目 | 所获得成果 | 
  
   | 1 | 胡哲成 | 博士 | 兵器科学与技术 | 新型组合式环形聚能装药技术研究 | 1篇SCI收录:Formation and penetration capability of an annular-shaped charge,Mathematical Problems in Engineering(SCI),2021.041篇EI收录:Numerical simulation of jet formation underwater by focusing annular liner,Journal of Physics: Conference Series(EI),2021.01
 1篇核心论文:隔板对聚能装药形成射流性能的影响,兵器材料科学与工程,2018.08,中文核心
 | 
  
   | 2 | 毕广剑 | 博士 | 兵器科学与技术 | 无人机复合蜂窝夹层机体结构抗毁伤性能研究 | 2篇SCI收录:1、Impact Resistance Analysis of a Composite Double-Layer Honeycomb Sandwich Structure. Strength of Materials, 2021
 2、 Micro Fracture Behavior of Composite Honeycomb Sandwich Structure. Materials,2020
 1篇EI收录:Mechanical performance of spacecraft protection structure under hypervelocity,Journal of Physics: Conference Series(EI).2021
 1篇核心论文:混合双层蜂窝夹层结构抗侵彻性能分析,兵器装备工程学报,2019.中文核心
 | 
  
   | 3 | 赵鑫 | 博士 | 兵器科学与技术 | 基于改进NSGA-II算法的主轴承组合结构协调匹配设计方法研究 | 2篇SCI收录:1、Research on coordination design method of main bearing assembly structure based on the maximum radial deformation of bearing bush International Journal of Engine Research(SCI)2021
 2、Multi-objective optimization of main bearing assembly structure based on improved NSGA-II Energy Science & Engineering(SCI)2022
 1篇核心论文:柴油机单个主轴承变形协调特性评价方法及影响规律研究 车用发动机 2022 北大核心
 | 
  
   | 4 | 汤雪志 | 博士 | 兵器科学与技术 | PTFE/Cu药型罩的制备与性能研究 | 2篇SCI收录:1.Effect of the Fabrication Technique on Compressive Properties of Cu-PTFE Composites. Advances in Materials Science and Engineering. 2021
 2.Comparative study on microstructure and properties of different designed PTFE/Cu materials[J]. Journal of Materials Research and Technology. 2022
 1篇EI收录:Experimental Study of Hot Pressed Sintered Modified Materials. Journal of Physics: Conference Series. 2020.
 | 
  
   | 1 | 白雄 | 硕士 | 机械工程 | 基于环境信息和运动学约束的地面无人作战平台路径规划研究 | 1篇SCI收录:UAV Path Planning Based on Improved A and DWA Algorithms[J]. International Journal of Aerospace Engineering,2021.1篇核心论文:融合环境信息和运动约束的改进A*算法研究.计算机工程与应用 2021年4月
 | 
  
   | 2 | 陈凯 | 硕士 | 航空宇航科学与技术 | 高强耐热镁合金异形舱段挤压成形工艺及组织性能研究 | 1篇SCI收录:Obtaining Uniform High-Strength and Ductility of 2A12 Aluminum Alloy Cabin Components via Predeformation and Annular Channel Angular Extrusion;coatings;2022
 1篇核心论文:Mg-Re-Zn合金舱段内环筋预变形强化机理研究;兵器材料科学与工程;2022
 1项发明专利:外纵筋筒形件双向差速挤压成形方法(2/5)2022
 | 
  
   | 3 | 洪志雄 | 硕士 | 兵器工程 | 冲击载荷作用下PBX炸药替代材料的响应及载荷传递特性 | 1篇EI收录:PBX炸药模拟炸药的动态力学行为及损伤本构研究.火炸药学报.2022.6 | 
  
   | 4 | 李昊 | 硕士 | 兵器科学与技术 | 爆破型鱼雷对潜艇毁伤效能评估 | 1篇EI收录:Effects of charge type and structure parameters on armor protection performance. Journal of Physics: Conference Series 2021(EI收录号:20211710252219)2篇核心论文:
 1、爆轰载荷下三层药型罩射流成型影响研究 兵器装备工程学报 2021
 2、截顶辅助双层药型罩射流成型影响研究 兵器装备工程学报 2022
 5篇学术论文:
 1、30万m3/年矿山开采爆破方案设计 2019年弹药技术发展研讨会 2019.
 2、基于阿里伯克级ⅡA型驱逐舰的毁伤效果评估 第一届试验鉴定与目标特性学术论坛 2020.
 3、基于舰船目标的毁伤评估方法研究 第十一届爆炸力学实验技术专题研讨会 2020.
 4、双模转换战斗部形成毁伤元数值模拟研究 中国兵工学会火箭导弹专业委员会 2020.
 5、不同材料对双层药型罩射流成型影响研究 第十三届全国爆炸力学学术会议 2021.
 | 
  
   | 5 | 王辰 | 硕士 | 兵器科学与技术 | 超空泡射弹波浪环境入水空化流场特性研究 | 2篇SCI收录:1、Numerical investigations of flow characteristics of a pumpjet propulsor in oblique inflow[J]. Applied Ocean Research, 2020
 2、Numerical investigation of water-entry characteristics of high-speed parallel projectiles [J]. International Journal of Naval Architecture and Ocean Engineering, 2021
 2篇EI收录:
 1、斜流工况下泵喷推进器推进性能数值分析.推进技术,2020
 2、超空泡射弹并联入水多相流场与弹道特性研究.振动与冲击, 2021
 1篇学术论文:超空泡射弹并联入水多相流场数值研究,第十六届全国水动力学学术会议暨第三十二届全国水动力学研讨会会议论文集(上册),2021
 | 
  
   | 6 | 肖向东 | 硕士 | 兵器工程 | PBX炸药动态力学性能及点火行为研究 | 2篇SCI收录:1、Mechanical behavior of a typical polymer bonded explosive under compressive loads. Journal of Energetic Materials,2021年
 2、Study of the sympathetic detonation reaction behavior of a fuze explosive train under the impact of blast fragments. Journal of Mechanical Science and Technology,2021年
 1篇学术论文:JH-14C 力学性能及损伤机理研究 第十三届全国爆炸力学会议 2021年7月
 1篇EI收录:传爆药静态压缩力学性能及损伤特性研究爆炸与冲击2022年
 1篇核心论文:冲击波作用下引信传爆序列殉爆的数值模拟高压物理学报2021年3月
 | 
  
   | 7 | 王璐 | 硕士 | 兵器科学与技术 | 破片和冲击波对复合装甲的联合毁伤研究 | 1篇核心论文:钢/陶瓷/PE/钢结构抗破片侵彻研究.兵器材料科学与工程, 2021.10.26 | 
  
   | 8 | 肖游 | 硕士 | 火炮、自动武器与弹药工程 | 火焰特征量对弹药快烤的影响研究 | 1篇EI收录:基于FDS与CFD组合的快速烤燃数值模拟 火炸药学报(EI)2022.053篇核心论文:
 1、多种复合炸药装药的慢烤特性及其机理 高压物理学报 2022.04
 2、快烤条件下火焰特征量的影响因素研究 兵器装备工程学报 2022.06
 3、火焰特征量对快速烤燃的影响研究 高压物理学报 2022.06
 | 
  
   | 9 | 赵鑫 | 硕士 | 兵器科学与技术 | 电镀双金属药型罩战斗部侵彻性能研究 | 1篇核心论文:药型罩侵彻性能仿真与优化.兵器装备工程学报,2021 | 
  
   | 10 | 李文耀 | 硕士 | 兵器工程 | 基于ORB-SLAM2室内动态稠密地图重建算法研究 | 1篇SCI收录:Fast Matching Method of UAV Aerial Photography Enhanced Low Illumination Image/International Journal of Aerospace Engineering/2022 |